R820SF(mini)
Still deciding? Please contact us immediately!
Current product category
R820SF(mini)
Still deciding? Please contact us immediately!
Current product category
Key words
- Product Description
-
Compatibility:
2.4GHz S-FHSS mini Receiver is designed to use with FUTABA S-FHSS/FHSS 2.4GHz transmitters, such as air system T4YF,T6J,T6K,T8J,T10J, T14SG ,T18MZ,T18SZ under S-FHSS/FHSS protocol mode.
Feature:
- S.BUS output can easily cooperate with any S.BUS support flight control system.
- CPPM output support some CPPM input flight control system.
- 13.6mS latency under S.BUS output mode(default status), 20.4mS latency under CPPM output mode.
- Up to 8 channels support.
Specifications:
Voltage Range: 3.6~8.5V Operating Current: 60mA max and 45mA under linked Operation temperature: -10~70 degC Latency: 13.6mS or 20.4mS Sensitivity: about -95dBm Weight: 3g Size: 30mm*14mm*3mm Bind procedure:
- Turn on the S-FHSS/FHSS transmitter, leave it 0.5M~1M away the receiver.
- Connect the battery to the receiver while pressing receiver’s F/S button.
- Red LED light on and Green LED off when searching signals, and turn to Green LED light on and Red LED off indicate bind is succeeded.
Fail-safe setting:
S-FHSS mini Receiver set failsafe on the S-FHSS/FHSS transmitter just like the operation of the FUTABA receivers if the feature exist.
NOTE: You must set failsafe feature while flying your models to avoid any out of control. An example of a useful Failsafe setting would be to shut down the model’s throttle, so that it does not fly or drive away uncontrolled.
S.BUS/CPPM mode switch guide:
If your receiver has been linked with your transmitter, please power off your transmitter. When your receiver’s LED light red, push down and hold the button on your receiver for more than 6 seconds and not more than 10 seconds, release the button to see the green led flash, push down the button again right now, receiver get back to light red. Now the MODE status has changed between SBUS mode and CPPM mode. When green led flash low indicate S.BUS mode to CPPM mode, and green led flash fast indicate CPPM mode to S.BUS mode.
NOTE: Receiver get into S.BUS mode as default mode after bind to transmitter.
LED status indicated under normal working status:
RED LED GREEN LED Status on off No signal searched off solid Signal is very good off flash Signal is not very good off off-flash Signal is weak
Inquire Now
Note: Please leave your email address, our professionals will contact you as soon as possible!
Address：
D-5,Building B ,International Technology Cooperation Park, No.2, TaiShan Road, Xinwu District, WuXi
Tel：
E-mail：
Quick Navigation
Online Message
If you have any product related questions, please feel free to contact us!
Copyright © 2024 CORONA ELECTRONIC AND TECHNOLOGY CO.,LTD.丨 Business License